Install Android Apps on Windows 10 Mobile

Project Astoria BETA

Minimum Required:
Windows 10 Mobile build 10166

!!IMPORTANT!!
After you done installed an apps. Do this: | or you get crash developer mode setting.
- Disconnect wconnect (cmd: wconnect disconnect emulator-5554)*
- Turn Off device discovery
*number of your emulator must match

#List of supported devices:
- Lumia 1520
- Lumia 930
- Lumia 929 (icon)
- Lumia 928
- Lumia 925
- Lumia 920
- Lumia 830
- Lumia 820
- Lumia 730
- Lumia 635 (1GB RAM variant)

Download Project_Astoria.zip

1. Extract Project_Astoria.zip to a folder
2. Open the folder Windows Connect, then install IpOverUsbInstaller.msi and vcredist_x86.exe
3. Go to your Windows 10 Mobile’s Settings > Update & Security > For Developers and enable Developers Mode, as well as Device Discovery
4. Now go to the Windows Connect folder, then open an elevated command prompt (Shift + right click > Open command window here)
5. After that, you’ll need to connect to the phone — and there’s two way of doing that (Wi-Fi or USB | USB method is recommended):
- If you want to connect using USB, type on cmd:
wconnect usb
ENTER

- And if you want to connect over Wi-Fi, type on cmd:
wconnect [your IP]
ENTER
e.g: wconnect 192.168.123.123

6. Then it’ll ask for the pairing code, just type the pairing code and hit enter (see your pair code on phone at pair button)
7. After that, navigate to the adb folder and open an elevated command prompt
8. To make sure that your device is connected, type adb devices and press ENTER to show the list of devices that are connected
9. place the APK file that you want to install on the adb folder or somewhere you known, and type:
adb install APKNAME.apk (replace APKNAME with the APK file’s name)
ENTER

if your apk on your own folder, type the path. e.g:
adb install D:/MyAPK/APKNAME.APK
ENTER

Just wait it and if the app installation done will notice you : Success.

#Additional tools
Use GMAPS Patcher to remove any google service build-in on apk's
(some app may not work)

BONUS: Clash of Clans (ALPHA)

If you wanna play Clash of Clans in your Lumia/Windows Phone. Using this patching apk of CoC game.



https://drive.google.com/open?id=0BzJ2KChE86P0d3F6eWduT3lIeUE

I have removed sign by Google account and any google service and you can using facebook account to play
- You still can play the game normally without losted any saved game because now you synched to facebook
* please note: if you found some bugs , you must know this is my ALPHA Repacked APK

Nokia Lumia EU ROM GDR2+Amber Download Link

TORRENT: LINK
DIRECT DOWNLOAD: LINK (Please use the torrent wherever possible)

MIRROR LINK: http://www.jealy.co.uk/vega/rm-821.zip

Please also note that this is the French ROM so once flashed, the phone will be in French, but luckily one of the first options is to change language!

I do not recommend flashing your device, it will destroy your warranty and it may have unexpected results which I am not liable for.
Flashing your device also wipes all data off the device, be sure to backup.

Pre-requisites:

Nokia Care Suite (Cracked) www.veganovus.co.uk/NCS.zip <-- Torrent
USB Cable
Nokia Lumia 920
Firmware (Above)

1. Download and install Nokia Care Suite (Don't launch Care Suite until step 2 is complete)
2. Extract usergroupsconfiguration.cfg to C:\Program Files\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0 or C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0 for 64-bit (Be sure to overwrite)
3. Extract the firmware to it's location (Instructions are in the archive)
4. Open Nokia Care Suite
Attachment 39252

5. Double click Product Support Tool

6. Choose Caresuite External
Attachment 39253

EXTRA IMPORTANT STEP: Choose Work Offline on the bottom right of the window.
Attachment 39262



7. In Product Support Tool choose File > Open Product
Attachment 39254

8. In the filter box type RM-821


IMPORTANT EXTRA STEP: IN THE BOTTOM LEFT SELECT PROGRAMMING > RECOVERY



9. Your firmware should then appear in the box below if you put it in the correct folder on your PC.
10. Bite the bullet, hit START!
11. Once you hit start it will bring up the recovery screen saying it has lost connectivity, this is normal.
Attachment 39256

12. Turn your mobile off.
13. Once off, plug your mobile into your PC and hold the DOWN VOLUME key - because it was plugged into your PC it should power on automatically into the "RECOVERY" mode.
14. Hit retry in the recovery screen.

It should then start flashing your device.

Once flashed it will load the welcome screen like a new device (In French), navigate to the next screen and you should get the option to change language (don't have screenshots sorry)


KNOWN ISSUES
If you encounter this issue:

"................................1326.2002_068.vpl has invalid signature. : recovery failed."

Please use the method below.
Rename all of the files and remove the leading serial numbers like below.

Original Source : Wpcentral.com

Install Nokia Pro Cam, Nokia Video Upload and Video Trimmer on Lumia 920, 810 on GDR2

Before you can install the Nokia Pro Cam you need to update your Lumia to GDR2 with Amber update, check your phone for update or you can manually flash the GDR2 with amber using this guide : Click Me

1- Download Fiddler2 here

2- Open Fiddler

3- Go to Tools > Fiddler Options > Connections > mark "Allow remote computer to connect" and OK.

4- Restart Fiddler

5- Press "Control + R" to open a file with a Notepad in Fiddler.

6- Press "Control + F" to make a search and paste this:

OnBeforeRequest(oSession: Session) {

7- Click on "Search Next"

8- At the next line, paste this code:

if(oSession.uriContains("RM-821_eu_euro1_425"))
{
oSession.url = oSession.url.Replace("RM-821_eu_euro1_425","RM-877_nam_att_205");
}

9- Now you have to change both "RM-821_eu_euro1_425" to Manufacturer Name from your Lumia. You will find it on Extra+Infos on your Lumia.

10- Save the Notepad file and close

11- Now pickup your phone and forget about your PC. Click on WiFi settings, connect with the same WiFi you are connected on your PC.

12- Still in your phone and WiFi options, click on your WiFi, Activate proxy and put your PC IP Address on Server field. On port field, put 8888.

13- Now you have to search for QR Codes below